How To Install Aux In Audi A6

When you lot are retrofitting our CarPlay and Android Machine kits to your Audi, you may desire to activate the AUX pin on the caput unit on certain cars (Normally the cars equipped with the Audi AMI media interface).

Notation: If y'all do take the Audi AMI interface you can alternatively apply an AMI-AUX adapter instead of activating AUX. This volition piece of work well but volition require you to run a cable to the AMI input from our IMI-1000 wiring harness. While this will work fine, information technology is not "hidden" and some customers prefer a completely subconscious installation.

An AMI to AUX adapter tin exist used instead of activating AUX on the Audi head unit

This is because our retrofit CarPlay and Android Auto Kits connect direct to the AUX pin on the MMI head unit via our plug and play wiring loom, then activating of the pin is an elegant solution and completely hidden.

This tutorial will show y'all the steps required to actuate the AUX pin on the rear of the caput unit, you will besides run across "AUX" as an option in the media carte on the central display once you have performed the activation process.

one. Install VCDS

To perform the activation y'all will need VCDS, this is bachelor from Ross Tech.

ii. Connect to OBD port

Connect your OBD interface to the OBD port in the car and connect to the vehicle via VCDS.

Connect to the vehicle using VCDS

3. Enter "Select Control Module" menu

View the control modules in VCDS

4. Enter the "Electronics 2" tab

The electronics 2 tab focuses upon the infotainment system

5. Enter the "5F module"

The 5F module allows you to reconfigure the MMI head unit

vi. Enter "Coding"

The first activeness to take before performing any coding changes is to salve current current configuration. This can exist done by saving the "current code" highlighted in the dialogue below. Shop this in a .txt file, as yous can recode dorsum to this coding value if something goes wrong.

The highlighted hexadecimal number is the current "long code" for the continued vehicle

7. Deselect AMI and Select AUX-IN

In order to successfully actuate the AUX-IN[PR-UE3] on your MMI head unit, you lot will need to kickoff deselect AMI[PR-UE7].

Deselect AMI[PR-UE7] abs select AUX-IN[PR-UE3]

8. Re-create Long Lawmaking

Re-create the "long code" in row 1 and become dorsum to the 5F module tab

ix. Apply coding to 5F module

Paste the new coding string into the empty box in the dialogue beneath and hit "Practice it!"

Paste new coding string into empty dialogue box in a higher place

Once the new coding string has been pasted into the dialogue box in a higher place, you are set to code the 5F module.

Apply the coding to the 5F module and the AUX-IN[PR-UE3] will be activated

You volition now come across AUX-IN in the Media bill of fare, this selection should be selected when using our retrofit CarPlay and Android Auto Kits in guild to laissez passer sound signals from the IMI-1000 and the MMI audio system.

Source: https://integratedautomotive.co.uk/activating-aux-input-on-audi-mmi-3g-and-mmi-mib1/

Posted by: gonzalezhinfore.blogspot.com

Share this post